Some Helpful Tips to Prepare Your Car For Passing a Smog Test

Residents of California are all to aware of the importance of passing the San Francisco smog test. Knowing that you have this test coming up can cause a lot of anxiety, since failing it can end up costing you a lot of money, not to mention wasted time and energy. But there’s no need to stress out if you know a few basic things to follow in order to prepare your car for passing the test. Read on to find out what these tips are so you can assure yourself some peace of mind.

First of all, you want to make sure your oil is properly changed. There are plenty of station that you can take your car to where they will ensure that oil that is being used in your car’s engine is clean. Besides passing a smog test, changing your oil regularly is imperative to keeping your car running smoothly and keeping it well maintained so that it lasts longer, so this is actually something that you should be doing anyway.

Secondly, you will want to make sure that your engine is running smoothly and properly. Have you noticed any warning lights come up lately? Any strange noises? Perhaps even an odd smell or your car just doesn’t feel like it’s running normally? Any of these symptoms will warrant a trip to the mechanic, but even if you don’t notice anything out of the ordinary, it’s good to get your engine looked at by a professional if you have a smog test coming up. That way, if there are any problems that you might not be aware of, your mechanic can find them and correct the issues so they don’t become a reason for not passing your test.

Finally, you want to simply take your car for a twenty to thirty minute drive right before you take your test. This is a little known secret among drivers, but warming your car up in this way actually conditions it so that you will have a much better chance of passing your smog test. These are all simple things that you can do, but rest assured, they are highly effective tips! So follow these hints, and you will increase the odds that you pass your smog test. Good luck!

Helpful Tips for DIY Car Radiator Flushing

Once you turn the key, start your vehicle’s ignition and begin to drive, your internal combustion engine starts producing a substantial amount of heat. In order to remove this heat and prevent your engine from overheating, a functional radiator is needed. A car radiator uses thermal heat exchange to eliminate high temperatures and heat to keep a vehicle’s engine in working condition. This means that larger vehicles require larger radiators to facilitate the same effect.

For radiators to be effective and stay cool, they must be cleaned regularly by means of flushing. Solid deposits, residues, and other sediment buildup can cause a cooling system to clog or fail entirely. Flushing a car radiator is one of the most important routine maintenance jobs and must be done to keep vehicles operational over time. Fortunately, it can be done on your own. It’s also quick and inexpensive to do. Continue reading to learn some tips that can help you when it comes time to flush your car radiator.

Get Started With the Right Supplies

The first thing to do when it comes to flushing a car radiator is gather up all the necessary supplies and materials. It is never a fun situation to get halfway through your project, only to discover you are missing a key element. Going back to the store could pose a problem; especially if the radiator has already been drained. Ideal provisions for radiator flushing includes a funnel, cloth rag, coolant, radiator flush solution, Phillips screwdriver or wrench, separate container for old coolant, and extra rags for accidents and spills. When you have determined that all your supplies are in place, you can begin the process of flushing the radiator.

Here’s What To Do:

Before you remove the radiator cap, be sure the car engine is COMPLETELY cool; otherwise you run the risk of spilling hot coolant on yourself. And this really burns!

Next, flush the used coolant out of the radiator. Do this by locating the radiator drain plug. It is typically located at the bottom of the radiator. If you have trouble finding it, refer to your owners’ manual or look online for pictures and instructional videos. You can also contact a professional mechanic for over-the-phone assistance.

Once you find the drain plug, place the container for old coolant under the drain and open it up. Let the old coolant flow out for a few minutes; if it seems to be moving slow, check to see if the plug is all the way open.

When the radiator is empty, replace the drain plug and open the radiator cap.

Next, pour the flush cleaning solution inside. Fill the remaining space inside the radiator with room temperature water.

Now you are ready to replace the radiator cap; just be sure it is screwed on tight. It is possible for caps to fall off, which allows coolant to escape from the radiator.

Let the car engine run until it reaches its normal driving temperature. Then turn it off and let it cool completely.

Once the car engine is cool again, you are ready to flush the solution from the radiator and add fresh clean coolant. Use the same emptying process as before.

Use a 50/50 solution of coolant and water to get optimal and safe results. You can find pre-mixed coolants at your local auto store. This is sometimes more convenient.