4 Useful Car Detailing Tips

Car detailing is an essential process to clean and restore the interior and exterior of the car. This type of work is a deep, top-to-bottom clean that leaves the car looking like new. It can even include removing wheels or other parts to reach the otherwise unreachable parts like the brake components, arch liners, and suspension. Here are a few simple car detailing tips to leave the interior and exterior of the vehicle looking like new:

Leather upholstery

Cleaning the leather upholstery as soon as a spill or mark is left behind can significantly increase the likelihood of a complete cleanup. If any marks like dye transfers from clothing, ink, or lipstick are left for 24 hours or more, the stain can easily set in permanently. There are plenty of purpose-made leather-cleaning kits in the market that can be left in the car to help with the timely cleanup.

Air vents

Brush out the air vents at regular intervals. The vents are a great dust magnet and easy to clean using the brush attachment on a vacuum cleaner. But, if the brush attachment isn’t small enough to collect all the dust, a simple artist’s brush can be used to collect any dust that is left behind.

Deep-clean

Give the carpet and upholstery a deep-clean. A high-quality carpet cleaning machine can quickly lift the deep dirt that has been left to build up over time. Most of the cleaners will spray a cleaning solution to help leave the carpet looking like new while also sucking up the grime and dirt. The hardware to deep-clean the vehicle is widely available to rent for a day or two, or buy outright, which will likely be the most cost-effective option in the long-term.

However, for the carpet that is too ingrained with dirt, the best option is simply to have it replaced with new. It is relatively easy to buy the replacement carpet to match a specific make and model of car.

Squeaky doors

Car doors with an annoying squeak can quickly be rectified with a few squirts of WD-40 or a similar lubricant. Once the doors are moving freely, add a small amount of motor oil or lithium grease to keep away the squeaky noise and avoid issues with corrosion. Also, it is worth inspecting other parts of the vehicle, such as the door latches for the early signs of corrosion. A quick squirt of the silicone spray can help to maintain the condition of these parts.

Helpful Tips for DIY Car Radiator Flushing

Once you turn the key, start your vehicle’s ignition and begin to drive, your internal combustion engine starts producing a substantial amount of heat. In order to remove this heat and prevent your engine from overheating, a functional radiator is needed. A car radiator uses thermal heat exchange to eliminate high temperatures and heat to keep a vehicle’s engine in working condition. This means that larger vehicles require larger radiators to facilitate the same effect.

For radiators to be effective and stay cool, they must be cleaned regularly by means of flushing. Solid deposits, residues, and other sediment buildup can cause a cooling system to clog or fail entirely. Flushing a car radiator is one of the most important routine maintenance jobs and must be done to keep vehicles operational over time. Fortunately, it can be done on your own. It’s also quick and inexpensive to do. Continue reading to learn some tips that can help you when it comes time to flush your car radiator.

Get Started With the Right Supplies

The first thing to do when it comes to flushing a car radiator is gather up all the necessary supplies and materials. It is never a fun situation to get halfway through your project, only to discover you are missing a key element. Going back to the store could pose a problem; especially if the radiator has already been drained. Ideal provisions for radiator flushing includes a funnel, cloth rag, coolant, radiator flush solution, Phillips screwdriver or wrench, separate container for old coolant, and extra rags for accidents and spills. When you have determined that all your supplies are in place, you can begin the process of flushing the radiator.

Here’s What To Do:

Before you remove the radiator cap, be sure the car engine is COMPLETELY cool; otherwise you run the risk of spilling hot coolant on yourself. And this really burns!

Next, flush the used coolant out of the radiator. Do this by locating the radiator drain plug. It is typically located at the bottom of the radiator. If you have trouble finding it, refer to your owners’ manual or look online for pictures and instructional videos. You can also contact a professional mechanic for over-the-phone assistance.

Once you find the drain plug, place the container for old coolant under the drain and open it up. Let the old coolant flow out for a few minutes; if it seems to be moving slow, check to see if the plug is all the way open.

When the radiator is empty, replace the drain plug and open the radiator cap.

Next, pour the flush cleaning solution inside. Fill the remaining space inside the radiator with room temperature water.

Now you are ready to replace the radiator cap; just be sure it is screwed on tight. It is possible for caps to fall off, which allows coolant to escape from the radiator.

Let the car engine run until it reaches its normal driving temperature. Then turn it off and let it cool completely.

Once the car engine is cool again, you are ready to flush the solution from the radiator and add fresh clean coolant. Use the same emptying process as before.

Use a 50/50 solution of coolant and water to get optimal and safe results. You can find pre-mixed coolants at your local auto store. This is sometimes more convenient.

Best Car Detailing Tips And Techniques

Maintaining the condition of your vehicle can prevent significant depreciation by keeping it clean and protecting the bodywork against deterioration. Removing the sand and grit that settle on the surface can prevent the paint from eroding or sustaining scratches. There are a number of techniques to apply and products to use to ensure that the paint and features are best maintained.

Scratches, rust, and chipped paint can result from the accumulation of dirt and poor cleaning methods. Using improper products including dishwasher liquid can remove the shine from the body and degrade the overall appeal of the car that can take time and money to restore. To prevent degrading the vehicle and ensure that it remains well maintained, there are a number of washing techniques that can be applied to keep cars looking as good as new.

Invest in good wash and wax products that are developed for use with vehicles and provide extra protection against regular scuffs and sand. These ranges have been developed with quality compounds to create a barrier of protection for cars. These items are important when regular washes are performed and should never be replaced with soaps or household detergents that could compromise the appeal and the integrity of bodywork.

Do not wash a vehicle by applying the product to the body without rinsing the exterior first. Washing a car with the grit and sand remaining on the metal work will cause minor scratches and general deterioration that affects the overall shine and appeal of the paintwork. Simply removing the dirt with a simple rinse can prevent against these scuffs and ensure that the exterior is well maintained.

When keeping vehicles in mint condition, it requires the maintenance of the interior and the exterior. One of the most common causes for poor air conditioner service or the presence of foul odors inside the automobile includes the accumulation of dirt and dust in the vents of the system. Keeping the interior smelling new and fresh includes clearing the vents of grime and grit blowing air into the vents and wiping with a soft clean cloth.

All metallic features must be carefully cleaned and maintained with the use of compatible auto products. Keeping the mirrors and rims in good condition includes the use of the right products that will remove scuffs and improve its shine. Taking the necessary steps can assist in producing exceptional results to keep the motor vehicle in the best possible condition.

Use the correct tools to wash the car to prevent scratching the surface or failure to produce a natural shine. The application of a soft sponge with circular motions along the body can remove dirt while producing a high shine. Do not make use of regular products or brushes that could cause additional damages.

Car washing is best performed by a professional service offering superior vacuuming, polishing and maintenance. General management performed at home requires the use of the proper tools and products. These steps will ensure that the appearance and condition of vehicles are well kept and protected against expensive damages.

Some Tips Related To The Car Conversions For Novice Drivers

The regular hike in fuel prices across the world has become at the matter of concern for motorists across the world and therefore they are searching for different fuel options which could facilitate them to economically drive their vehicle. Going through this issue huge discussions and debates are going in the cyber world to find the best solution to the problem. Interestingly converting the engine configuration of existing car has emerged as the reliable way to combat the problem and therefore lots of motorists are converting their existing gasoline car into electric car.

Well, this might surprise you but in recent years electric car conversion has originated as the highly preferred ways for minimizing the cost of driving a personal car to huge extent. An interesting benefits enjoyed by the converting the gasoline into an electric car is decline in the expenses on fuel followed by pollution free environment. Apart from this another worth mentioning benefit of an electric car is that there are lots of countries throughout the world which offer huge discount on different types of taxes levied on car owners, along with this the owners of electric cars are free to enter any country without any restrictions.

But, the problem from which almost every car owner struggles is absence of knowledge about the whole conversion project. There are lots of people who believe that converting their existing car into an electric car is the best option to enjoy its maximum benefit. Anyway this might be their personal opinion because on the basis of my knowledge gained from various authentic sources, to convert a car into an electric car the best way is to hire a donor car. Because hiring a donor car for conversion will offer you maximum benefits that you expect from your vehicle. There is plethora of expert technicians across the world that offer the facility of car conversion to the owners willing to minimize the expense on fuel consumption.

If you are also speculating to convert your existing car into an electric car then there certain factors which you should consider, before you visit to any of technicians.

1. Which donor car is best for you: Although electric cars offer maximum benefits to their owners in terms of fuel efficiency and emission norms, but still depending upon their make the owners have to invest substantial amount on its maintenance and conversion. Before generally the conversion process involves the replacement of existing engine with powerful motor and additional equipments. If you have a hatchback then it will remain a small engine and same for a sedan. Along with this you should also make sure that converting kit is available in the market for specified car.

2. AC system or DC system: As a general practice the car conversion companies suggest for DC engine system due to its affordability, but the system requires use of various batteries for covering the long distance. On the other side AC engine system is capable for covering long distance smoothly but due to its sophisticated nature it is quite expensive than compared to DC system.

3. Running distance: An electric car could be driven at the top speed of 70 miles per hour up-to 50 miles, after which it requires charging. To avoid any problem of battery drainage while driving it would be better to assess your driving kilometers before starting the journey.

4. Weight of battery: This might surprise you but weight of the battery also affects the performance of an electric car to huge extent. Because if a heavy battery is installed in your car it will require more power to run it, which means quick drainage and need of charging quickly. Therefore enjoy smooth durability it is imperative to install compatible battery in your converted car to enjoy its hassle free drive.

Car Buying Tips: Why Does It Make Sense to Buy a Discontinued Car Model?

Often while planning to purchase a car, the right model and the car manufacturing brand become the key deciding factor. Many a times, the research proves to be outdated as some car models become discontinue.

When a car manufacturer stops producing a model because of a number of reasons, it is called a discontinued car model. However, the benefits of buying a discontinued car model outweigh the risks. Buying a car which is no longer in showrooms can mean greater savings. If you are planning to purchase a car, the following points will help you to comprehend why it makes sense to buy a discontinued car model.

1) Discounted Purchase Price

It will have a significantly lower price than a brand new car. One of the benefits of purchasing it is that you get a new car for the price of a used car. As a buyer, you are in a good position to get a favorable deal for a discontinued car model. The dealer needs to move inventory to create space for new cars in demand. Therefore, it becomes easy to negotiate a price that suits your wallet.

2) Shared Spare Parts

Many car buyers hesitate to purchase it due to the potential risk of unavailability of spare parts in the future. You can minimize the risk as many car manufacturers continue producing car parts long after they stop manufacturing a car. Additionally, you can transfer many spare parts of current models to the discontinued model. While purchasing from the manufacturer can become expensive, you can find shared spare parts easily. Thus, if the car requires repairing in the future, you can mend it without any tension.

3) Wide Choice of Selection

It comes at a relatively cheaper price than a new car. The value for money received from buying a discontinued model significantly increases due to cheap pricing. The money spent on purchasing a new car can mean compromising on a few features. However, purchasing it can aid you to step up your choice of selecting a better car. Therefore, you can avail a pool of upgraded features for a lower price.

4) Warranty Period

When you purchase a recently discontinued model, chances are that you eligible for warranty. During the warranty period, the servicing and maintenance of car parts are the responsibility of the original car manufacturer. Many manufacturers produce parts in high volumes to cover the entire warranty period. Thus, you will be able to repair it easily, until it falls under the warranty period. And, a mechanic or an expert can attend to any defect after the warranty period is over.

Purchasing it may bring some risks with it. However, there are many benefits of buying such a car. It can be a lucrative deal for a car buyer looking to make an affordable purchase. So, next time when you want to buy a car, consider a discontinued car model.